What Is the Reason that the Porcelain Tile Cutting Machine Is Not Flat When Cutting?

When the porcelain tile cutting machine is cutting unevenly, we generally eliminate the porcelain tile problem first, then consider the mechanical problem of the porcelain tile cutting machine itself. There are many details of the porcelain tile cutting machine technology. If those are not handled well, there will be also uneven problem. So when there is a problem, analyze it slowly and find out the reason.

Ⅰ. Reasons why the procelain tile cutting machine is not flat during operating

In high standard ceramic tile processing, the debugging of porcelain tile cutting machine is very important. Roller tolerance is less than 10 mm within the workmanship, cutting platform horizontal tolerance is less than 10 mm, and baffle is made of solid steel, which is the reason of the porcelain tile cutting machine in the cutting not so easy to occur the uneven problem, on the premise of solid process. That is to say, if there occurs the uneven problem, you can check whether there is a tolerance and blockage of the roller, because the roller is easy to be blocked by some dirt slag, resulting in unevenness, then there will be ceramic tile cutting machine cutting tile is not smooth. And in this case, the roller is usually cleaned first and then replaced

How to judge the unevenness of the cutting platform, you can directly put the tiles on, and then observe whether there is a gap on the four sides. If the gap is relatively large, it is a great degree of unevenness. At this time, you can fill in some filler, or apply a layer of paint. Sometimes in the processing, the vibration of the porcelain tile will also affect the processing effect. If the vibration of the porcelain tile cutting machine is severe, it may be that the fixation is not stable enough, and you can weld it for fixation.

Ⅱ. The following methods can be used to effectively solve the uneven problem of porcelain tile cutting machine when cutting

1. When the water pipe is installed in the assembly of the porcelain tile cutting machine, a filter net is directly added to connect with it, and the filter net is placed outside the water outlet, so as to prevent the impurity particles flowing out of the processing from entering into the roller.

2. Clean up the dust of the porcelain tile cutting machine in time. Each part is cleaned with clean water circulation and no residue is allowed. If there is residual residue in local area, clean and scrub it immediately.

Through the maintenance of the above points, porcelain tile cutting machine can maintain good stability, so that it is not easy to appear uneven phenomenon when cutting.

In the actual operation of the porcelain tile cutting machine, the each step should be well grasped. Through the understanding of the porcelain tile cutting machine and good maintenance, the uneven phenomenon when cutting can be reduced.